Just a quick note, I've been running FreeBSD 6.2-RELEASE FreeBSD 6.2-RELEASE #0 on the intel little valley for several months and it works great. I'm not running X, so I don't know how the video driver works, but for me the network, IDE, and all the basics work. I haven't experienced any problems so far.
Here's a dmesg:
Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE #0: Sat Jul 21 04:46:25 UTC 2007:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: <INTEL DG965CO > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) CPU 215 @ 1.33GHz (1333.39-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8 Features=0xafe9fbff <FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0xc109 <SSE3,MON,TM2, <b14>, <b15>> AMD Features=0x100000 <NX> real memory = 1038565376 (990 MB) avail memory = 1006194688 (959 MB) ioapic0: Changing APIC ID to 4 ioapic0 <Version 1.4> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <INTEL DG965CO> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 0xfff00000-0xffffffff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <SiS 964 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2280-0x228f at device 2.5 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <multimedia, audio> at device 2.7 (no driver attached) ohci0: <SiS 5571 USB controller> mem 0x4a104000-0x4a104fff irq 20 at device 3.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0x4a103000-0x4a103fff irq 21 at device 3.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ohci2: <SiS 5571 USB controller> mem 0x4a102000-0x4a102fff irq 22 at device 3.2 on pci0 ohci2: [GIANT-LOCKED] usb2: OHCI version 1.0, legacy support usb2: <SiS 5571 USB controller> on ohci2 usb2: USB revision 1.0 uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0x4a101000-0x4a101fff irq 23 at device 3.3 on pci0 ehci0: [GIANT-LOCKED] usb3: waiting for BIOS to give up control usb3: timed out waiting for BIOS usb3: EHCI version 1.0 usb3: companion controllers, 3 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 8 ports with 8 removable, self powered sis0: <SiS 900 10/100BaseTX> port 0x2000-0x20ff mem 0x4a100000-0x4a100fff irq 19 at device 4.0 on pci0 miibus0: <MII bus> on sis0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: pcib2: <PCI-PCI bridge> at device 31.0 on pci0 pci2: <PCI bus> on pcib2 acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0 sio0: type 16550A pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd9fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1333387980 Hz quality 800 Timecounters tick every 1.000 msec ad0: 76318MB <WDC WD800JB-00JJC0 05.01C05> at ata0-master UDMA100 Trying to mount root from ufs:/dev/ad0s1a
¥