Wow, after many failed attempts to resurrect the Thecus, its back in action! Many thanks to:http://onbeat.dk/thecus/index.php/N2100_Recovering_from_a_bad_config_change
Darn - still not back from the dead. I'll have to wait for Martin to release the new image in a few weeks. At least I've verified that I can connect over serial again. The USB serial connector won't work. :-(
ip -l 192.168.0.123 ip -h 192.168.0.1 ip -d 0.0.0.0--- load -r initrd -b 0x00800000 load -r vmlinuz -b 0x00200000 exec -c "console=ttyS0,115200 root=/dev/ram0 initrd=0xa0800000,42M mem=128M@0xa0000000"--- Debootstrap error: "Release file signed by unknown key"--- debootstrap etch /target http://ftp.us.debian.org/debian
Thecus n2100 serial connection:
Computer HW Thecus 2 2 3 6 5 5 The ribbon to the thecus must have the red stripe on the upper side.